• VDD=VDDQ=1.2V +/- 0.06V
  • Fully differential clock inputs (CK, CK) operation
  • Differential Data Strobe (DQS, DQS)
  • On chip DLL align DQ, DQS and DQS transition with CK transition
  • DM masks write data-in at the both rising and falling  edges of the data strobe
  • All addresses and control inputs except data, data strobes and data masks latched on the rising edges of the clock
  • Programmable CAS latency 9, 11, 12, 13, 14, 15, 16, 17 and 18 supported
  • Programmable additive latency 0, CL-1, and CL-2  supported (x4/x8 only)
  • Programmable CAS Write latency (CWL) = 9, 10, 11, 12, 14, 16
  • Programmable burst length 4/8 with both nibble  sequential and interleave mode
  • BL switch on the fly
  • 16banks
  • Average Refresh Cycle (Tcase of 0 oC~ 95 oC)
    - 7.8 μs at 0oC ~ 85 oC
    - 3.9 μs at 85oC ~ 95 oC
  • JEDEC standard 78ball FBGA(x4/x8), 96ball FBGA(x16)
  • Driver strength selected by MRS
  • Dynamic On Die Termination supported
  • Two Termination States such as RTT_PARK and RTT_NOM switchable by ODT pin
  • Asynchronous RESET pin supported
  • ZQ calibration supported
  • TDQS (Termination Data Strobe) supported (x8 only)
  • Write Levelization supported
  • 8 bit pre-fetch
  • This product in compliance with the RoHS directive.
  • Internal Vref DQ level generation is available
  • Write CRC is supported at all speed grades
  • Maximum Power Saving Mode is supported
  • TCAR(Temperature Controlled Auto Refresh) mode is supported
  • LP ASR(Low Power Auto Self Refresh) mode is sup-ported
  • Fine Granularity Refresh is supported
  • Per DRAM Addressability is supported
  • Geardown Mode(1/2 rate, 1/4 rate) is supported
  • Programable Preamble for read and write is supported
  • Self Refresh Abort is supported
  • CA parity (Command/Address Parity) mode is sup-ported
  • Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or differentbank group accesses are available
  • DBI(Data Bus Inversion) is supported(x8)
  • Technical Data Sheet

    Technical Data Sheet Technical Data Sheet의 Part Number, Rev., Update Date, Remark를 나타낸 표 입니다.
    Part Number Rev. Update Date Remark
    H5AN4G4NBJR 0.9 2017-04-11  


    SpeedSpeed의 Part Number, Speed를 나타낸 표 입니다.
    Part Number Speed
    TF 2133 15-15-15
    UH 2400 17-17-17